Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

I only have a problem to use KNOMI2, dosen't fit

Are you aware you stuck the heat sink on the stm chip not the tmc driver? (edited)

Hey, I dont get where you got the umbilical mod with the pcb holes from. Can you share me a link for that? Do you drilled the holes for the 3do cam pcb by yourself or is there a stl with?

Is there a pros/cons to using the umbilical style vs dragchain?

this looks great btw.

Looks good, does this work wiothout modification now? I'm about to build my Stealth Burner with the LGX Lite and the EBB boards.

Thanks

James

Thanks for taking this on! I am working on building this and making CAD edits as I go. Its not currently going to work because of a bunch of small issues. The major issue is that the way that the EBB boards are assembled in the CAD model had them actually passing through each other. This means the whole board needs to shift aft and the little adapter parts needs to be re-done.

A few other things:
* The hole diameter in the adapter should be 2.8 for self tapping threads
* The adapter should be 3.3mm thick
* The hole in the Stealthburner front is 4mm, it should be 2.8mm for self tapping.

Had to make some minor mods added a washer for the SB0000 and used 2 of the connector to the LGX lite, also rigged a bracket from something else to hold the other side of the connector board. Got everything lined up and connecting just need to wire it back to the mainboard and the tiny connectors to the tool head.

Hi after printing the face-plate the holes of the SB0000 connection board doesn't line up any advise?