Help keep your Pokemon TCG cards organized, especially when it comes to your energy cards and/or bulk! These multi-color print dividers are the general size of a Pokemon card with a tab to help make it easy to see and get to the different sections of your cards.
The model comes in two styles. The “Type on Tab” version has the type logo on the tab. The “Large Type on Card” version has a smaller tab with the color on the card itself.
I prefer printing the cards face down on a textured PEI plate a nice finish (as shown in the photos).
Update: I have now added “Raised” versions for single color machines where you can do a filament swap at 1.2mm (for 0.2mm layer height). For the raised version, you cannot print them face down.
Models are printed with 0.2mm layer height on a 0.4mm nozzle. There is no infill for this model due to it being only 1mm thick and no supports required.
The author marked this model as their own original creation.