P1P Vision Enclosure Magnet Supports
These Supports are for the P1P Vision Enclosure and the Magnets you need for the Door and Sidepanels
24
80
0
1418
updated February 18, 2023
Description
PDFHolds the magnets in place and is more relailable. For the Sidepanels two versions are available. Single Magnet Holders or long stripes.
- PLA/PETG/ABS/ASA
- Infill 100%
- Brim
You need Suplerglue, clean the panels and parts with alcohol before you glue them.
It's all fun and games until you glue the sidepanel or door to the Printer. Yes i did. Let these dry for a long Time and a long time means hours ;)
Tags
Model origin
The author remixed this model.
