Rugged Box for Drill Handle and Collets

The case is based on my parameterizable “Rugged Box” and fits Sisul's Drill Handle and up to 16 collets.

Also have a look at my remixed collets.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Assembly

You will need six M3x30 screws to assemble it.

Cut a piece a foam (~10 mm thick) for the lid to hold down everything nicely when closed.

Screws

I like these screws which have a nice round head:
Allen hex socket button head screw

Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws

Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.

Modified it to fit the drill holder and collets