Simple Phone Stand - Multiple Sizes

These phone stands were designed to be quick and efficient to print while providing good balance and support for devices and a reasonable viewing angle for viewing at a desk while oriented either in portrait or landscape.

With a 0.4mm nozzle, it is recommended to print with a perimeter extrusion width set to 0.48mm and 3 perimeters - this will make the print solid with no infill movements for rapid printing.

Each stand requires less than 30g of filament.

3 Sizes are uploaded here:

• PhoneHolder_Sm (small) - Sized for iPhone SE 2020
• PhoneHolder (regular) - Sized for iPhone 13/14
• PhoneHolder_XL (large) - Sized for iPhone 13 Plus/14 Plus