Hey guys,
for this mod for "Full Bear MK3s" you will need the following things:
Parts to print:
3x Carriagespacer
1x Spacer (82mm)
3x Railholder
1x Railholder 20mm
Use the spacer (82mm) to equally space the "Railholders" from the extrusion edge. Mount the "20 mm Railholder" in the top left, else the XY calibration will fail.
Place the 3x "Carriagespacers" on top of the 3x linear rail carriages - else the bed mount will hit the y axis motor.
IMPORTANT: Check the pictures to see which carriage M3 screw holes to use to screw the bed mount in!
If you have any questions, contact me either here or on facebook :).
Thank you Grégoire for the Bear mod :D
https://github.com/gregsaun/prusa_i3_bear_upgrade
The author hasn't provided the model origin yet.