Reolink doorbell wedge

This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate.  It may work with other doorbells as well.  The inside could be cleaned up a bit but that won't be seen once mounted.  Feel free to share, alter, and support the community.  Just please don't sell/charge… What you get free, give free.

The wedge that comes with the doorbell will not be used. The metal plate will be used. You can use the screws that come with the doorbell for mounting. 

The model in the picture is slightly different than the one posted here. I angled the back to make it more aesthetically pleasing on the version posted.  The one pictured is square to the right of the camera.

Supports = Yes (build plate only)

Infill = 15

I printed with PLA+. I would recommend PETG, or PLA+, but anything will work. Just keep in mind it will be outside, possibly in the sun, etc.