Have a passenger and don't want to put your purse/bag on the floor? Problem solved!
This model does not require you to remove the headrest
Purse holder designed in TinkerCad. I have tried it on several vehicles and it fits, so it should be generally a universal design. With the settings I used below, it holds a decent amount of weight.
My print settings were as follows:
Vertical shells = 5 to increase strength
Infill = 40% Gyroid
Supports = Yes = I did snug with overhang threshold of 30
Brim = Yes - May not be needed, but I did one just in case
Filament = PLA+ (would recommend something strong like +, PETG, ABS, etc)
The author marked this model as their own original creation.