Catapult game - Toys For Tots design donation

A submission for Toys for Tots. Can you design an easily 3D printed toy to bring joy to the less fortunate at Christmas?
100
373
5
2062
updated December 16, 2022

Description

PDF

Toys for Tots is a genrous program aiming to provide toys for the less fortunate at Christmas time. IC3Dprinters organises a 3D printed portion where volunteer makers print toys for donation. This design is a donation to the pool of printable toys.

This catapult game requires a lot of skill, but if you find it too hard, the catapult can be used as a standalone toy. The included cubes can be stored under the catapult arm mount for safe keeping.

Prints using only 70g of filament with no support. 10% infill is sufficient. The ‘entire assembly’ file has all required components. The catapult arm Otherwise, you can print the ‘standalone main assembly’, ‘catapult arm’ and four ‘cubes’ separately if desired. In any case, the catapult arm snaps into position to complete assembly.

To see if you can help, and for more details on how this mode was designed, please see this video: 

For more details on Toys for Tots, start here: https://www.ic3dprinters.com/2021-toys/

Tags



Model origin

The author marked this model as their own original creation.

License