{"data":{"model":{"id":"337027","slug":"cubled-led-cube-8x8-matrix-384-leds","name":"CubLED - LED Cube - 8x8 Matrix (384 LEDs)","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":4,"description":"

This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon:

IMPORTANT NOTE

Even this LED cube is much much easier to assemble than my previous \u201cGeodesic(k) RGB LED Spheres\u201d , it still requires quite some experience, basic knowledge in electronics and a good amount of patience.

I will e.g. not provide an exact electronics schematic because it's quite individual. But if you're familiar with WLED, which I use to run it, you will be able to do it.

Please read all the instructions below carefully before starting.

SAFETY NOTE
Because there are a lot of LEDs in a small space and also a Step-Down converter which will get quite warm, the LED cube will get very warm over time, specially on full/high brightness. Mine reached over 50\u00b0C within an hour.
DON'T let it run unattended or for too long!

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you \ud83d\ude09).

If you want to support my work directly, you can buy me a coffee.

Also check out my other models.

Printing

I highly recommend to print it in PETG. It can get quite warm and PLA will get soft at temperatures >45-50\u00b0C.

Print the first two layers in white (get the whites white you can find) and the following layers in a reflective but not translucent color like silver or \u201cmetal like\u201d filament. I tried many different ones to find the best one (Extrudr metallic PETG).

Parts to print

1 x CubLED 8x8x6 - Top.stl
1 x CubLED 8x8x6 - Bottom.stl
4 x CubLED 8x8x6 - Side.stl
1 x CubLED 8x8x6 - Insert.stl
Optional:
- 1 x CubLED 8x8x6 - Stand.stl
- 1 xCubLED 8x8x6 - Sanding Jig.stl

Summary:

Print it with 0.2mm layer height
Layer change after the first two layers (to switch from white to silver filament, see below for details)
Don't use any infill (except top & bottom layers of course...)
I recommend to use the satin spring steel sheet

Additional parts

General

You need these additional parts:

6 x WS2812 LED 5050 RGB 8x8 64 LED Matrix
e.g. from here
1 x ESP32 (or any other microcontroller of course, which supports WLED)
\u201cESP-32S ESP-WROOM-32\u201d 30-Pin Version recommended (others could be too long)
1 x Switch to turn it on/off
24 x Magnets 10 x 5 x 1 mm
TBD (details will follow):
- 3 x 18650 battery cells
- 1 x UBEC (Step-Down converter to 5V, ~5A recommended)
  It must provide enough power to light up all the LEDs
  \u26a0 see note below
- 1 x Level converter (if the microcontroller is 3.3V, like most ESP32)
- 1 x BMC to protect the battery

Tools:

Different wires
Power wires must have a large enough diameter to handle the load of the LEDs
RC connectors (or just solder everything without connectors, except for the charging connectors)
GOOD Glue (s. below)
Hot glue gun (depending on \"how you do it\")

Battery

Basically you can use whatever you want and like the most.
The insert provided is made for a 3s1p configuration which allows the fast charging time.

Software

I don't use any spacial self-programmed software for the cube, but just WLED out of the box. This worked so much better than I expected first, that I never had the need to create my own code.

Install WLED as described on their site.

Assembly

You will need a good strong glue to assemble the side and bottom parts. I highly recommend to use an epoxy with long enough work time (>15 min.), because you will need some time to get all parts together and align them properly. The one I used is \u201cUHU Plus Endfest 90\u201d (Epoxy Ultra Strong):

Sanding

It's recommended to (wet) sand the sides a little bit to get rid of any bumps so the parts fit together more nicely. To keep the 45\u00b0 angle a bit easier, which is very important, you can use the sanding jig you'll find in the files section.

Side parts and bottom

Glue in a short piece of filament to these five holes (one side & bottom) using a drop of super glue on each side part. They are used to align the parts properly. It's easier if you glue in a longer piece and cut it to length:

NOTE: The top side is the one with the slots for the magnets!

Test that everything fits together nicely (no gaps) and none of the filament pieces from the last step are too long (they have to be quite short):

To protect the surfaces I covered them with tape:

Tape together the four side pieces edge on edge:

Now it's time to apply the epoxy to the side faces (only the sides, NOT top/bottom). Don't add too much epoxy to prevent it from squeezing out too much:

\u201cFold\u201d the sides together and fix it with some tape:

Now add epoxy to the bottom faces and fixate it with some more tape:

Let the epoxy harden out properly before removing the tape.
I then used the round metal of a screw driver to smooth out the edges, which turned out better than I expected tbh.:

Matrix panels

Solder together the panels in the order below worked best for me.

It's important to keep the cables between the panels as short as possible, except for the top panel which is used to open the cube later. There is not much space to waste within the cube.

Before starting to solder, mark each panel with its order in the chain (1-6) and which the bottom an top edge is (only barely visible on the photo). This makes it a bit easier to keep them the correct way.

I connected the power in the middle to have less voltage drop,

Don't insert them into the cube yet, except you want to test it already. They will be hold in place with the \u201cinsert\u201d part which holds the battery and electronics (no glue required).

Electronics

As mentioned already, I will not provide an exact schematic how to wire everything. My solution is not perfect and I'm not super happy the way it's done at the moment (but it works).

Basically you have the power side, 18650 battery cells in 3s1p configuration connected to a BMS. This goes to the switch and then to the Step-Down converter (an UBEC with 5A worked best for me and used up the least space). It also needs some connectors to charge and balance the cells with an external charger. Finally the output of the UBEC goes to the VIN of the ESP32 and the LEDs.

For the logic side you'll need a level converter if the used microcontroller outputs 3.3V, which is the case for most of them. I can work without it, but will be definitely be more stable when using one. The pin used to control the LEDs, normally D2 on a ESP32 when using it together with WLED is connected to the level converter and the HV side goes to the DIN of the first panel.

Than can look more ore less like this at the end. Be careful that everything fits into the \u201cinsert\u201d part:

The connector for the cell balancing will be either connected to the BMS or external charger. My external charging bypasses the BMS.

Slide the battery and electronics pack into the insert part:

It should not fall out if you turn it upside down. If it does, fix it somehow.

Final assembly

Put 12 pairs of magnets side by side and mark the upper side of each pair:

Slide each of the unmarked magnet into a slot of the side parts and fixate it with the marked magnet so they don't fall out until the matrix panels are installed in the next step. The magnets are not super strong, so you can also use a piece of tape to hold the marked magnets.

Now install the prepared panels. No glue required. They will be hold in place by the insert.

Also make sure all cables run along the sides, as the insert must touch the bottom panel.

Slide in the insert:

Add some hot glue to the holes in the insert to prevent the insert from falling out when turned upside down. This way you can remove the hot glue again in case you have to replace a panel for example.

Take each single marked magnet and insert it into the corresponding slot of the top part. Take care to insert it in the correct way so they are attracted to the ones in the side panels.

To fix the top panel you have to use some drops of super glue.

Shorten the three wires from the panels and solder on the plug (or you can solder it together without a plug if you want):

Now put on the top part and make sure the magnets hold it in place. As mentioned already, these small magnets are not very strong, but for me it works perfectly fine.

There are also holes for small pieces of filament on the top of the side panels and the top panel itself. These can be used to prevent the top panel from sliding which should make the magnets hold it better.

Power it up

Now it's time to turn it on. If no \u201cmagic smoke\u201d raises up, connect to WLED and start playing around.

","category":{"id":"41","path":[{"id":"13","name":"Art & Design","nameEn":"Art & Design","description":"Explore 3D printed works of art and breathtaking designs. Download premium STL files of movie characters, design accessories, miniatures, busts, and animals.","__typename":"CategoryType"},{"id":"41","name":"Other Art & Designs","nameEn":"Other Art & Designs","description":"Replace boring home decor with unique printed designs. Ingenious vases of various shapes, original lamps and light sources, quaintboxes, and other artworks.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:18:09.642015+00:00","firstPublish":"2022-12-11T13:11:22.456257+00:00","datePublished":"2025-02-16T16:18:09.618743+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"CubLED - The continuation of my Geodesic(k) RGB LED spheres. (A little) easier to build and more LEDs.","likesCount":765,"makesCount":9,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":870,"displayCount":11452,"filesCount":8,"privateCollectionsCount":458,"publicCollectionsCount":366,"pdfFilePath":"media/prints/337027/pdfs/337027-cubled-led-cube-8x8-matrix-384-leds-ea8f72c4-7dc1-4335-81a6-056afabf892b.pdf","commentCount":41,"userGcodeCount":0,"remixCount":4,"canBeRated":false,"printer":null,"image":{"id":"1402070","filePath":"media/prints/337027/images/2887004_e9f5503e-dbdb-4827-8855-ad513ad79457/img_3193.jpg","rotation":0,"imageHash":"yQcKBYAHqHeGeHiEe2aIiBKegPFp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"images":[{"id":"1402070","filePath":"media/prints/337027/images/2887004_e9f5503e-dbdb-4827-8855-ad513ad79457/img_3193.jpg","rotation":0,"imageHash":"yQcKBYAHqHeGeHiEe2aIiBKegPFp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402069","filePath":"media/prints/337027/images/2887003_18a37f56-7280-446f-a477-dbb847770096/img_3215.jpg","rotation":0,"imageHash":"SvYJHYAHqId2iHiFelaYh/h8l/8n","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402068","filePath":"media/prints/337027/images/2887006_031f336c-106a-4812-a46a-b11b2595cbf8/img_3210.jpg","rotation":0,"imageHash":"ilcKDYoHqHd3iHiEe2aYd/aEfVBX","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402067","filePath":"media/prints/337027/images/2887005_b870815a-4ac5-4d4c-8c0a-6f0093ebccf0/img_3211.jpg","rotation":0,"imageHash":"SeYJHYIHqHd1iHiFemaId/h+dq+I","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402072","filePath":"media/prints/337027/images/2887007_b232cfaf-a0db-4fe9-bcea-382039b499cb/img_3190.jpg","rotation":0,"imageHash":"yTcKDYYHqHd2iHiEe2aYiEePcFBn","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402073","filePath":"media/prints/337027/images/2887010_9f031ef5-5e25-4e2f-83d9-1df342fcee0e/img_3232.jpg","rotation":0,"imageHash":"RecFFYQHqYaHh3iDe2aIifl5m5+3","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402074","filePath":"media/prints/337027/images/2887011_3a950096-46d2-4696-9f8f-55316e8e66b2/img_3191.jpg","rotation":0,"imageHash":"hygKFYQHqHd3h3iEe2aYiAd2dVBX","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},{"id":"1402071","filePath":"media/prints/337027/images/2887002_1e8d30d8-fca7-4be7-8e4c-da63bfd9ed40/img_3347.jpg","rotation":0,"imageHash":"CPgJDwAIh5eIeIdwjIh3iIiHqYIHuV8D","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1402076","filePath":"media/prints/337027/images/2887012_19153b1d-c5b6-4d06-a601-9d7033f16430/img_3321.jpg","rotation":0,"imageHash":"BygKBwYHd6l4h3iAfHmId5d3WkAJB4gA","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1402075","filePath":"media/prints/337027/images/2887009_215f4e2f-9d73-47d3-993c-0d6288005515/img_3341.jpg","rotation":0,"imageHash":"yScOFwYHeJiJd4eAe2mHiIeIqQnICYYA","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1402077","filePath":"media/prints/337027/images/2887008_2a259cac-6f5a-432b-9a3e-991dbeaa09c3/img_3343.jpg","rotation":0,"imageHash":"RxgKFwQHiKh3h3iAfImHd5iHenAICHcA","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"}],"tags":[{"name":"light","id":"104","__typename":"TagType"},{"name":"lamp","id":"105","__typename":"TagType"},{"name":"led","id":"242","__typename":"TagType"},{"name":"color","id":"253","__typename":"TagType"},{"name":"cube","id":"942","__typename":"TagType"},{"name":"5050","id":"2229","__typename":"TagType"},{"name":"leds","id":"2236","__typename":"TagType"},{"name":"rgb","id":"2280","__typename":"TagType"},{"name":"matrix","id":"5288","__typename":"TagType"},{"name":"wled","id":"6871","__typename":"TagType"},{"name":"colorful","id":"7482","__typename":"TagType"},{"name":"ledcube","id":"57954","__typename":"TagType"},{"name":"cubled","id":"119301","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"1495124","filePreviewPath":"media/prints/337027/stls/2885083_776f55d3-ca53-4b29-ba6b-4bbd03c52e04/cubled-8x8x6-cube_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"258431","name":"Rugged Box (Parametric)","slug":"rugged-box-parametric","ratingAvg":"4.9482200647","likesCount":26525,"liked":null,"datePublished":"2025-02-16T16:04:31.504694+00:00","dateFeatured":null,"firstPublish":"2022-08-14T13:38:58.502077+00:00","downloadCount":103259,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:04:31.545460+00:00","image":{"id":"1163583","filePath":"media/prints/258431/images/2362183_fd1aff76-7db1-4c13-9908-66b64e2ff041/rugged-box-parametric-01.png","rotation":0,"imageHash":"6GgSHor4p3eJiHh9hnZmuGiYBnZiYCc=","imageWidth":1545,"imageHeight":1389,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":{"ranking":null,"competitionId":"84","__typename":"PrintLatestCompetitionResult"},"__typename":"PrintType"},{"id":"682523","name":"Rugged Box with Modular Slots (Parametric) - Shallow height (multi row version)","slug":"rugged-box-with-modular-slots-parametric-shallow-h","ratingAvg":"5.0000000000","likesCount":638,"liked":null,"datePublished":"2025-02-16T16:12:15.427141+00:00","dateFeatured":null,"firstPublish":"2023-12-16T15:41:20.277959+00:00","downloadCount":2118,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:12:15.470332+00:00","image":{"id":"2521887","filePath":"media/prints/682523/images/5363171_6032b483-a346-4801-bf45-8f3ebd7becdc_7e19cad1-e940-4d21-9733-dfc2fe2ea791/img_3723.jpg","rotation":0,"imageHash":"7ygKLYT1q3d3dpaIdniIiwmYpsBp","imageWidth":4706,"imageHeight":3617,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"452573","name":"Rugged Box with Modular Slots (Parametric) - Normal height","slug":"rugged-box-with-modular-slots-parametric-normal-he","ratingAvg":"4.9230769231","likesCount":861,"liked":null,"datePublished":"2025-02-16T16:14:57.877709+00:00","dateFeatured":null,"firstPublish":"2023-04-15T17:05:02.994336+00:00","downloadCount":3875,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:14:57.920825+00:00","image":{"id":"1781286","filePath":"media/prints/452573/images/3724515_f3483377-f464-421c-a0bc-646aa038ec60/img_3507.jpg","rotation":0,"imageHash":"phkKJYaflGkrlXjKd0iWhoi7ALVm","imageWidth":6240,"imageHeight":4160,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1029476","name":"Magnetic Markers for 3D Scanning","slug":"magnetic-markers-for-3d-scanning","ratingAvg":"5.0000000000","likesCount":76,"liked":null,"datePublished":"2025-02-16T16:08:38.537220+00:00","dateFeatured":null,"firstPublish":"2024-10-12T16:21:49.654862+00:00","downloadCount":940,"mmu":false,"category":{"id":"28","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"28","name":"Portable Devices","nameEn":"Portable Devices","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:08:38.561886+00:00","image":{"id":"3616792","filePath":"media/prints/1029476/images/7812554_6c28d248-3fff-4bb9-824d-66293b65946c_cd3883b0-fdb7-452a-87a8-bd881a2de110/img_3833.jpg","rotation":0,"imageHash":"KwgKBYDnodKEl2bPiFeZmwR2e0BK","imageWidth":5922,"imageHeight":4037,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"618792","name":"Window Bird Feeder","slug":"window-bird-feeder","ratingAvg":"5.0000000000","likesCount":208,"liked":null,"datePublished":"2025-02-16T16:12:25.076532+00:00","dateFeatured":null,"firstPublish":"2023-10-20T21:37:19.848184+00:00","downloadCount":525,"mmu":false,"category":{"id":"53","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"53","name":"Outdoor & Garden","nameEn":"Outdoor & Garden","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:12:25.103847+00:00","image":{"id":"2323564","filePath":"media/prints/618792/images/4909034_dc5a8094-2277-4862-b6a6-87c63771e4ba_937e1466-10b2-4416-9fe1-0d6bd2f5a862/img_3705.jpg","rotation":0,"imageHash":"HPgJDYIKc3mXhpZ0moiHRaBLCY3H","imageWidth":4964,"imageHeight":3414,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"51462","name":"Expandable Steel Sheet Holder (MK & MINI)","slug":"expandable-steel-sheet-holder-mk-mini","ratingAvg":"4.9339805825","likesCount":4884,"liked":null,"datePublished":"2025-02-16T16:21:22.087857+00:00","dateFeatured":"2021-03-12T21:57:02.530841+00:00","firstPublish":"2021-01-09T23:39:46.792716+00:00","downloadCount":10270,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:21:22.106639+00:00","image":{"id":"242234","filePath":"media/prints/51462/images/508078_5ad8be13-77d9-4b73-a8f2-eee5d7b48e25/img_1892.jpg","rotation":0,"imageHash":"ThgKFIJNaXdvdoabWEp6j4v4iA==","imageWidth":4983,"imageHeight":3037,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":{"ranking":null,"competitionId":"2","__typename":"PrintLatestCompetitionResult"},"__typename":"PrintType"},{"id":"337027","name":"CubLED - LED Cube - 8x8 Matrix (384 LEDs)","slug":"cubled-led-cube-8x8-matrix-384-leds","ratingAvg":"5.0000000000","likesCount":765,"liked":null,"datePublished":"2025-02-16T16:18:09.618743+00:00","dateFeatured":null,"firstPublish":"2022-12-11T13:11:22.456257+00:00","downloadCount":870,"mmu":false,"category":{"id":"41","path":[{"id":"13","name":"Art & Design","nameEn":"Art & Design","__typename":"CategoryType"},{"id":"41","name":"Other Art & Designs","nameEn":"Other Art & Designs","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:18:09.642015+00:00","image":{"id":"1402070","filePath":"media/prints/337027/images/2887004_e9f5503e-dbdb-4827-8855-ad513ad79457/img_3193.jpg","rotation":0,"imageHash":"yQcKBYAHqHeGeHiEe2aIiBKegPFp","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":{"ranking":null,"competitionId":"295","__typename":"PrintLatestCompetitionResult"},"__typename":"PrintType"},{"id":"58416","name":"Vallejo Paint Color Stand/Holder (25 mm)","slug":"vallejo-paint-color-standholder-25-mm","ratingAvg":"4.8695652174","likesCount":1166,"liked":null,"datePublished":"2025-02-16T16:20:56.726814+00:00","dateFeatured":null,"firstPublish":"2021-03-01T21:01:13.443012+00:00","downloadCount":4245,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-16T16:20:56.751296+00:00","image":{"id":"307020","filePath":"media/prints/58416/images/613949_e2df22a4-303f-4ddd-bf06-bb4ab42f1f66/img_2045.jpg","rotation":0,"imageHash":"IAgOB4Do2LeJd3d/hoZ4x3d3OgEINlAA","imageWidth":3444,"imageHeight":3229,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"3307","handle":"Whity","verified":false,"dateVerified":null,"publicUsername":"Whity","avatarFilePath":"media/auth/avatars/cb/cbaf82d9-d9b5-4793-8bc0-4fa4f4e06e59.jpeg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[{"id":"295","name":"LED Diffusers","slug":"led-diffusers","description":"It's hard to find a maker who doesn't get overly excited about the glow of an LED. We turn them into displays, accent light our projects, and sometimes create enough panic to shut down a major city. While we don't want you to create any bomb squares, we would love to see some LED fun out of you with custom LED diffusers. These can be diffusers for LED panels or LED strips but we would especially love to see some basic single LED diffusers made with just a LED, your print, and a button cell battery. All valid entries must house at least one LED with the light shining through the print, they cannot simply just hold the LED. With many of us entering the time of year with long winter nights, this is a great time to brighten your fellow makers days.","isOpen":false,"__typename":"CompetitionType"}],"contestsResults":[{"ranking":null,"contest":{"id":"295","name":"LED Diffusers","slug":"led-diffusers","modelsCount":256,"openFrom":"2022-12-02T00:00:00+00:00","openTo":"2022-12-11T23:59:00+00:00","__typename":"CompetitionType"},"__typename":"CompetitionResultType"}],"prusameterPoints":null,"latestContestResult":{"ranking":null,"competitionId":"295","__typename":"PrintLatestCompetitionResult"}}}}

CubLED - LED Cube - 8x8 Matrix (384 LEDs)

Model files

Model origin

License