PowerPole connector for QCX mini

Connect your PowerPole cables directly to the QCX mini!

Additional material required:

• A barrel connector like this one:
  • https://www.reichelt.de/hohlstecker-ohne-knickschutz-aussen-5-5-mm-innen-2-1-mm-hsw-21-9-p8664.html
• 4 M2.5 screws 16mm
• A few centimeters of insulated wires
• A pair of PowerPole connectors (2 housings, 2 contacts)

After printing the housing of this connector, solder the red PowerPole connector to the center pin of the barrel connector and the black one to the sleeve contact.

Insert the assembly, remove screws from QCX mini and fix the connector to the QCX mini's enclosure using the four M2.5 screws.