Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar.
You will need:
- 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend)
- 16 CHC M3x10mm screws
-16 M3 stop nuts
Door at this link :
https://cults3d.com/fr/mod%C3%A8le-3d/divers/flsun-v400-enclosure-cut-version
Printing without support, flat face against the bed.
The author marked this model as their own original creation.