FLSUN V400 Enclosure (Cut PLA version)

Enclosure for FLSUN V400. 

You will need:

- 2 polycarbonate panels 403x790x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend)

- 16 CHC M3x10mm screws

-16 M3 stop nuts

Door at this link :

https://cults3d.com/fr/mod%C3%A8le-3d/divers/flsun-v400-enclosure-cut-version

Printing without support, flat face against the bed. 

UPDATE! : I modified the bottom left side (Power Supply), the dimensions were not good. Thank you FABMNAT!

UPDATE 2 : I added two "Nuts holder" files in case the screws are not in front of the holes (depends on the printer settings...).