FLSUN V400 Enclosure (ABS version)

Enclosure for FLSUN V400
37
423
2
4615
updated December 28, 2022

Description

PDF

Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar. I made a different design to print it in PLA.

You will need:

- 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend)

- 16 CHC M3x10mm screws

-16 M3 stop nuts

Door at this link :

https://cults3d.com/fr/mod%C3%A8le-3d/divers/flsun-v400-enclosure

Printing without support, flat face against the bed. 

Requires a 300x300 printer

Printed on CR10s Pro V2 with Winkle ASA, 0,2 , 25% Gyroid, 3 walls, 4 bottom/6 top 

Model origin

The author marked this model as their own original creation.

License