Radiator Protector Set

This is a set of radiator protectors, designed for a busy area where wheeled office chairs (or similar) might impact and cause damage. They will fit radiators with a front face up to 75mm from the wall and with skirtings that are up to 20mm thick and of a height up to 160mm (height is not such an issue, just the geometry with the radiator services)

Left and Right-sided protectors are provided for both a drain point and a local thermostat. Do they work? Fortunately I haven’t had to find out yet…

Printed in PETG 30% infill and 4 perimeters; with the front face on the bed and bed contact supports ON (minor support material is needed for the screw lugs)