Printed out well, word of warning for folks though, it blocks the purge chute a decent amount so if you have a cover over it its not going to fit. 3 Stars (almost 4) just due to that
"Better" Bambu Lab X1 / X1C / P1P Spool Holder
Spool Holder for Bambu Lab X1/X1C.
Allows you to have it aginst a wall and swapping filament without moving the printer.
85
414
1
6116
updated March 6, 2023
Makes
Comments
View 2 more comments
@LordTowers_580176 It is designed to also work as a stand alone holder. My friend made one for use with an Ender 3 in an IKEA Lack enclosure. :)
@SpamFilter Yeah I've got it all assembled and really like it, tried a ton of ways to try to work with my setup and just can't figure out a way to mount. Will keep though for the stand alone aspect for sure
Much easier to load/unload when the printer is in a cabinet, but I had issues with the spool falling off during printing. I added the filament guide from magikfly and haven't had any issues since.
View one more comment
@SpamFilter I have the P1P. I was also using the stock P1P filament guide at the time, which was causing the filament to be pulled at an angle relative to the spool.
@collin93_613487 Thanks for the info. It seems that the problem might be with the P1P so I will update my description with the link to magikfly's filament guide.
Awesome work, I made a filament guide for this piece
 https://www.printables.com/model/398686-another-bambulab-filament-guide-arm
@magikfly_421677 Nice! Will try it out.
Printed great following the directions. I scaled the pin screws to 99% and they worked great.
