RatRig V-Minion Bed-Heater Mounting Aid
Aid to apply pressure on the heater mat after gluing it to the Bed.
2
28
0
268
updated November 12, 2022
Description
PDFThis is a 7mm thick sheet with the required cutouts for the electronics, leads and screws, so you can place this on the freshly mounted heater mat, stack weight on it and leave it overnight for proper adhesion.
I printed mine with 0.2mm layer height and 35% triangle infill so it can take some weight.
Model origin
The author hasn't provided the model origin yet.
