BTT Smart Filament Sensor Holders

Different kinds of Holders for the BTT Smart Filament Sensor.
Originally designed so i can fit the Sensor with my Belted-Z modded RatRig V-Minion.

Designed for M5x10 Bolts to fasten it to the extrusions.

Remove the original Backplate of the BTT Smart Filament Sensor and use some M3x10'ish Bolts to directly mount on the Holder.

!On the Inside Variants!: Bolt the Holder FIRST to the Frame then the Sensor to the Holder. You won't get to the mounting holes anymore otherwise.

Thanks to “Heisenberg19x” from the unoffical RatRig Discord, there is now also a version with a 0.2mm sacrificial layer if you want to print it flat - only for the “Base” Version though.