Industrial style handle (parametric)

This is an industrial style handle for your drawers and cabinets. 

It prints in on the large face without any support. I reccomend unsing at least 3 perimeters and 30% infill for the reqired strength.

I included a parametric F3D file, so you can easy adjust it to your needs.

Updates:

• The original handle was intended to be screwed on with allen screws from the outside.
  I now also included a version with hex opening, so you can inset a nut and screw it from the inside.
  I also included a version with a blind hole to be screwed from the inside with wood screws.
• I redisigned all three versions to improve the printability without support.
  Please make sure that the small dot is on the top.