The2187 - A Modular Modern 87 Key Mechanical Keyboard

As promised, this is another case for the modular system i described in: https://www.thingiverse.com/thing:4221440

This one is a more modern design, maybe with a little dash of cyberpunk, that's also a little more compact. The2187 is the pretend future redesign of The1987, assuming some industrious designer in the future looked back and wanted to capitalize on the popularity of the original.

The instructions and parts lists for The1987 all apply to this case.

Enjoy!

Update 1: I fixed the screw hole depth on the bottom halves so 8x M12x12mm screws will work better, Also if you have only M4x16mm - print 8 of the screw inserts and they can now be used as well

My other stuff (mostly Keyboards) https://www.thingiverse.com/revere521/designs

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Select

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

20%

Filament: hatchbox PLA

Notes:

Supports only for the bottom halves, if your printer does not bridge well