@mhaas Yes, I just checked in the files, the outer diameter is supposed to be 201mm. The outer Diameter of the previous version based on V3.0 was 205mm. Maybe there was a bug that caused you to get the old files?
Do you have this little triangle arrow feature in your model files? (edited)
@Irgendeintyp I have the little arrow, indeed! I checked in my Slicer and the objects from the .3mf are 205mm while the step file is the correct 201mm.
@mhaas That's really weird, since the 205mm version shouldn't have the arrow... Maybe your slicer is doing something weird and scaling the STL up? Does downloading the files again help? If you can't get it to import with the correct dimensions, you could also just print from the step file and make your own modifiers. (In prusaslicer you can also replace models in 3mf files while keeping the modifiers in place, though I don't know if your slicer has that same feature...)
@Irgendeintyp You were spot on about downloading the files again!
I usually download all files from printables, which gave me a zip file. And this zip file contained outdated files. I downloaded the file two days ago and it contains teil_a.3mf and teil_b.3mf.
I downloaded the file again last night and it now contains teil_a.3mf and teil_b_v3.2.3mf - these are the correct files! :)
I have spent some time in the slicer adding top/bottom layers for the filament holder sections. I will share my make later.
BTW, it seems that the modifier to hold the filament type stickers got lost!
Thanks again for the model and for your help in troubleshooting this issue!
I just tried to put the spool into my AMS and it's too big. I measured the diameter and it's 205mm instead of the 201mm of the original 3.2 spool.
Can you confirm if this spool is supposed to be 201mm?
@mhaas Yes, I just checked in the files, the outer diameter is supposed to be 201mm. The outer Diameter of the previous version based on V3.0 was 205mm. Maybe there was a bug that caused you to get the old files?
Do you have this little triangle arrow feature in your model files? (edited)
@Irgendeintyp I have the little arrow, indeed! I checked in my Slicer and the objects from the .3mf are 205mm while the step file is the correct 201mm.
@mhaas That's really weird, since the 205mm version shouldn't have the arrow... Maybe your slicer is doing something weird and scaling the STL up? Does downloading the files again help? If you can't get it to import with the correct dimensions, you could also just print from the step file and make your own modifiers. (In prusaslicer you can also replace models in 3mf files while keeping the modifiers in place, though I don't know if your slicer has that same feature...)
@Irgendeintyp You were spot on about downloading the files again!
I usually download all files from printables, which gave me a zip file. And this zip file contained outdated files. I downloaded the file two days ago and it contains teil_a.3mf and teil_b.3mf.
I downloaded the file again last night and it now contains teil_a.3mf and teil_b_v3.2.3mf - these are the correct files! :)
I have spent some time in the slicer adding top/bottom layers for the filament holder sections. I will share my make later.
BTW, it seems that the modifier to hold the filament type stickers got lost!
Thanks again for the model and for your help in troubleshooting this issue!
@mhaas I redid the modifiers and reuploaded all the files, so there should hopefully be no problems anymore...