Stepper motor cover X-axis with endstop switch - Mega Zero

Mega Zero v1 or V2 X-axis stepper motor cover with endstop switch. It uses one of the endstop switch with the metal bracket to screw into the cover. The stock parts cooling fan housing on the hotend will hit the switch. Note that the prints will be mirrored, so mirroring in the slicer is necessary.

Uses two screw in points on the X-axis stepper motor.

Supports not needed, depends on you. Will need to flip your X axis stepper motor wiring, or invert it in the firmware.

Print Settings

Printer:

Mega Zero

Rafts:

No

Supports:

No

Resolution:

200

Infill:

16% with more infill flowrate

Filament: