Flexible Large Can Lid (watertight)

Watertight on most normal cans, 10-mm diameter / 1.2kg cans.

Also see my PLA versions if you have no flexi filament.

And see my large version of this lid.

Avoid brittle PLA's for this, it needs some flex.

Print settings (Cura):

Walls x 3

Top/Bottom x 6

.2mm layer height

.4mm width

215c print

60 c bed

30mm/s

Flow 100% (I usually use 94% but aparently flexibles need a bit more flow)

Coasting enabled

Coasting Volume 0.032 (helps remove the seem)

Fan 0% first layer to 50% at layer 5

No brim or skirt needed

Print Settings

Printer:

Voxelab Aquila S2

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

none

Filament:

Iron Blue