Watertight on most normal cans, 75mm diameter / 415g cans.
Also see my PLA versions if you have no flexi filament.
And see my large version of this lid.
Avoid brittle PLA's for this, it needs some flex.
Print settings (Cura):
Walls x 3
Top/Bottom x 6
.2mm layer height
.4mm width
215c print
60 c bed
30mm/s
Flow 100% (I usually use 94% but aparently flexibles need a bit more flow)
Coasting enabled
Coasting Volume 0.032 (helps remove the seem)
Fan 0% first layer to 50% at layer 5
No brim or skirt needed
Printer:
Voxelab Aquila S2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
nonw
Filament:
SpiderMaker
Spider Flex TPE 75A
Iron Blue
Category: Containers
The author marked this model as their own original creation. Imported from Thingiverse.