First Sergeant - USA/USMC

I created (2) different types of the First Sergeant rank, the flat diamond or the 3D diamond version at the center.  When printing the 3D version labelled as “1stSgt V2”, the below perimeters worked best using the Cura Slicer:

Print Speed:  45-55mm

Print Walls:  4 layers at 1.2 mm thickness and select “Optimize Wall Printing Order”.

Print Top/Bottom:  4 layers at both top/bottom at 1.2 mm thickness.

Infill:  20% - Line (Infill Pattern)

Quality:  Normal or Higher