3D Models LearningEngineering

Variable Pitch Propeller Mechanism

16 reviews
A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley.
37h 5m
27× print file
0.20 mm
0.40 mm
362.00 g
In the contest Mechanical Marvels
2,013
3370
18
29 k
updated February 18, 2023

Print files

tools_full_set_0.2mm_PLA_MK3S_1h37m.gcode
tools_full_set_0.2mm_PLA_MK3S_1h37m.gcode
0.40
0.20 mm
1.62 hrs
19g
Prusa MK3/S/S+
all three tools
3 MB  |  September 25, 2022
rear_hub_v1_0.2mm_PLA_MK3S_3h59m.gcode
rear_hub_v1_0.2mm_PLA_MK3S_3h59m.gcode
0.40
0.20 mm
3.98 hrs
46g
Prusa MK3/S/S+
8 MB  |  September 25, 2022
front_hub_v2_0.2mm_PLA_MK3S_2h36m.gcode
front_hub_v2_0.2mm_PLA_MK3S_2h36m.gcode
0.40
0.20 mm
2.60 hrs
31g
Prusa MK3/S/S+
5 MB  |  September 25, 2022
blade_v1_0.2mm_PLA_MK3S_1h15m.gcode
blade_v1_0.2mm_PLA_MK3S_1h15m.gcode
0.40
0.20 mm
1.25 hrs
7g
Prusa MK3/S/S+
2 MB  |  September 25, 2022
spur-worm-gear_v4_0.2mm_PLA_MK3S_28m.gcode
spur-worm-gear_v4_0.2mm_PLA_MK3S_28m.gcode
0.40
0.20 mm
0.46 hrs
2g
Prusa MK3/S/S+
1 MB  |  September 25, 2022
thrust-washer_5x_v2_0.2mm_PLA_MK3S_7m.gcode
thrust-washer_5x_v2_0.2mm_PLA_MK3S_7m.gcode
0.40
0.20 mm
0.12 hrs
1g
Prusa MK3/S/S+
prints 5 parts
346 kB  |  September 25, 2022
hub_nut_v1_0.2mm_PLA_MK3S_51m.gcode
hub_nut_v1_0.2mm_PLA_MK3S_51m.gcode
0.40
0.20 mm
0.85 hrs
9g
Prusa MK3/S/S+
2 MB  |  September 25, 2022
rear_housing_0.2mm_PLA_MK3S_4h19m.gcode
rear_housing_0.2mm_PLA_MK3S_4h19m.gcode
0.40
0.20 mm
4.31 hrs
54g
Prusa MK3/S/S+
4 MB  |  September 25, 2022
front_housing_0.2mm_PLA_MK3S_3h36m.gcode
front_housing_0.2mm_PLA_MK3S_3h36m.gcode
0.40
0.20 mm
3.61 hrs
51g
Prusa MK3/S/S+
5 MB  |  September 25, 2022
bearing-1_v5_0.2mm_PLA_MK3S_1h23m.gcode
bearing-1_v5_0.2mm_PLA_MK3S_1h23m.gcode
0.40
0.20 mm
1.38 hrs
9g
Prusa MK3/S/S+
5 MB  |  September 25, 2022
shaft_0.2mm_PLA_MK3S_3h36m.gcode
shaft_0.2mm_PLA_MK3S_3h36m.gcode
0.40
0.20 mm
3.61 hrs
33g
Prusa MK3/S/S+
7 MB  |  September 25, 2022
spacer-1_0.2mm_PLA_MK3S_26m.gcode
spacer-1_0.2mm_PLA_MK3S_26m.gcode
0.40
0.20 mm
0.43 hrs
4g
Prusa MK3/S/S+
1 MB  |  September 25, 2022
rear_nut_v2_0.2mm_PLA_MK3S_33m.gcode
rear_nut_v2_0.2mm_PLA_MK3S_33m.gcode
0.40
0.20 mm
0.56 hrs
5g
Prusa MK3/S/S+
2 MB  |  September 25, 2022
planet-axis_3x_v2_0.2mm_PLA_MK3S_29m.gcode
planet-axis_3x_v2_0.2mm_PLA_MK3S_29m.gcode
0.40
0.20 mm
0.48 hrs
2g
Prusa MK3/S/S+
prints 3 parts
1 MB  |  September 25, 2022
rear-planetary-assy_v2_0.2mm_PLA_MK3S_3h17m.gcode
rear-planetary-assy_v2_0.2mm_PLA_MK3S_3h17m.gcode
0.40
0.20 mm
3.29 hrs
25g
Prusa MK3/S/S+
11 MB  |  September 25, 2022
spider_0.2mm_PLA_MK3S_19m.gcode
spider_0.2mm_PLA_MK3S_19m.gcode
0.40
0.20 mm
0.32 hrs
3g
Prusa MK3/S/S+
1 MB  |  September 25, 2022
front-planetary-assy_v4_0.2mm_PLA_MK3S_4h13m.gcode
front-planetary-assy_v4_0.2mm_PLA_MK3S_4h13m.gcode
0.40
0.20 mm
4.21 hrs
30g
Prusa MK3/S/S+
16 MB  |  September 25, 2022
spacer-2_v2_0.2mm_PLA_MK3S_35m.gcode
spacer-2_v2_0.2mm_PLA_MK3S_35m.gcode
0.40
0.20 mm
0.59 hrs
6g
Prusa MK3/S/S+
1 MB  |  September 25, 2022
bearing-2_v4_0.2mm_PLA_MK3S_49m.gcode
bearing-2_v4_0.2mm_PLA_MK3S_49m.gcode
0.40
0.20 mm
0.82 hrs
5g
Prusa MK3/S/S+
3 MB  |  September 25, 2022
spacer-3_v1_0.2mm_PLA_MK3S_3m.gcode
spacer-3_v1_0.2mm_PLA_MK3S_3m.gcode
0.40
0.20 mm
0.05 hrs
1g
Prusa MK3/S/S+
140 kB  |  September 26, 2022
control_gear_v2_0.2mm_PLA_MK3S_30m.gcode
control_gear_v2_0.2mm_PLA_MK3S_30m.gcode
0.40
0.20 mm
0.50 hrs
3g
Prusa MK3/S/S+
2 MB  |  September 25, 2022
blade_setting_crank_0.2mm_PLA_MK3S_27m.gcode
blade_setting_crank_0.2mm_PLA_MK3S_27m.gcode
0.40
0.20 mm
0.45 hrs
2g
Prusa MK3/S/S+
886 kB  |  September 25, 2022
control_gear_alt_0.2mm_PLA_MK3S_30m.gcode
control_gear_alt_0.2mm_PLA_MK3S_30m.gcode
0.40
0.20 mm
0.51 hrs
3g
Prusa MK3/S/S+
print only if standard control gear slips during use
2 MB  |  September 25, 2022
front_shaft_nut_v3_0.2mm_PLA_MK3S_25m.gcode
front_shaft_nut_v3_0.2mm_PLA_MK3S_25m.gcode
0.40
0.20 mm
0.42 hrs
4g
Prusa MK3/S/S+
1 MB  |  September 25, 2022
motor_crank_0.2mm_PLA_MK3S_1h10m.gcode
motor_crank_0.2mm_PLA_MK3S_1h10m.gcode
0.40
0.20 mm
1.17 hrs
9g
Prusa MK3/S/S+
2 MB  |  September 25, 2022
front_hub_alt_0.2mm_PLA_MK3S_2h50m.gcode
front_hub_alt_0.2mm_PLA_MK3S_2h50m.gcode
0.40
0.20 mm
2.83 hrs
23g
Prusa MK3/S/S+
update from 11 oct 2022
8 MB  |  October 11, 2022
rear_hub_alt_0.2mm_PLA_MK3S_4h3m.gcode
rear_hub_alt_0.2mm_PLA_MK3S_4h3m.gcode
0.40
0.20 mm
4.06 hrs
38g
Prusa MK3/S/S+
update from 11 oct 2022
11 MB  |  October 11, 2022

Model files

Propeller Assembly
9 files
Housing and shaft assembly
7 files
Final assembly
13 files
3mf for parts requiring supports
3 files
StanleyPatentPropeller.stp
StanleyPatentPropeller.stp
31 MB  |  February 18, 2023

Model origin

The author marked this model as their own original creation.

License