In Cura, the settings below worked better for me with this chevron and printed nicely:
Quality: Detailed/High quality settings (to get better detail for the bursting bomb)
Nozzle Tip: 0.2 - 0.4 (Can use a wider nozzle if printing size is beyond 200%)
Print Speed: 35-40 (because of the center bursting bomb)
Print Wall: (4) layers with 1.2 mm Thickness. Select Yes for “Optimize Wall Printing Order”
Print Top/Bottom: (4) layers for the top. Select Yes for “Monotonic Print Order”!
Infill: 20% - Line (Infill Pattern)
Shoutout to all my MGunz making big impacts on Land, in Air, and Sea!
The author marked this model as their own original creation.