{"data":{"model":{"id":"272767","slug":"bambu-lab-reusable-spool-holder-remix-four-updated","name":"Bambu Lab Reusable Spool Holder Remix Four (Updated)","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"4.9042553191","myRating":null,"ratingCount":94,"description":"

I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool.

I started with the refactored \u201cBambu X1 Re-Usable Spool\u201d as a base, then added the best features of the \u201cImproved Bambu Lab Reusable Spool Holder\u201d (everything except the heavier hex pattern), both of which were remixed from \u201cBambu Lab Reusable Spool Holder Hex Remix\u201d.

I added an additional label space on the other spool half. I like to have both sides labeled, (trust me it saves time). I also tilted the 6 pairs of holes all around the rim at 45deg to make it easier to secure the loose filament end (and not crimp it so you end up trimming it off later).

The shim STL is the one from BambuLab's original. Print two.

Update 3-15-2025: Corrected the missing spokes for the label on the Tall Snowflake half. Uploaded version V4 for this spool.

Update 12-31-23: Corrected the size of the central spindle hole on all versions to match the Bambu Lab original STLs. Current versions are V3 and V7. The slightly increased diameter allows my spools to proplerly fit on the excellent V-Spooler from Fryby Additive.

https://makerworld.com/en/models/98832
and
https://www.printables.com/model/684376

Update 11-19-22: Added a remaining filament measurement marks. These .2kg marks match the positions that Bambu Lab has on their spools. Even so, these are estimates at best.

Added to the following STLs:
Bambu Lab Reusable Spool Remix Four-Short-V6.stl
Bambu Lab Reusable Spool Remix Four-Tall-V6.stl
Bambu Lab Reusable Spool Hex Snowflake Tall - label v2.st

Do not use \u2018adaptive layer height\u2019 as that will flatten these marks and numbers out.

UPDATE 10-24-22: Corrected Tall Snowflake side to have proper pattern alignment with short side (cosmetic correction). Provided two versions of the Tall Snowflake half. One with label space, one without.

UPDATE 9-30-22: Added lightweight \u2018Snowflake\u2019 version of the Spool!

UPDATE 9-30-22: Corrected missing alignment tab on tall half of the spool. Cleaned up other minor imperfections on both halves. Set the spool diameter to 200mm to match that of the Bambu Lab versions. Added the bambulab_spool_spacing_shim.stl (print two). Current is V5.

UPDATE 9-27-22: Based upon feedback I have decreased the diameter of the center spindles to match those of other Bambu Lab reusable spools.

UPDATE 9-14-22: I have repaired the short side to be a more manageable size (was 9MB).

","category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","description":"Add cool improvements to your 3D printer - drybox, MMU2S filament buffer, or extruder visualizer. These smart ideas will make your printer even better!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-15T15:59:31.893730+00:00","firstPublish":"2022-09-07T19:32:59.277740+00:00","datePublished":"2025-03-15T15:59:31.857559+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"The best features (in my opinion) of the three previous remixes plus new features all combined. Now with measure marks.","likesCount":1186,"makesCount":111,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":6221,"displayCount":29882,"filesCount":7,"privateCollectionsCount":1052,"publicCollectionsCount":854,"pdfFilePath":"media/prints/272767/pdfs/272767-bambu-lab-reusable-spool-holder-remix-four-updated-ddc022f0-2642-4417-af20-f89c3540e1ec.pdf","commentCount":246,"userGcodeCount":0,"remixCount":8,"canBeRated":false,"printer":null,"image":{"id":"2071833","filePath":"media/prints/272767/images/4359067_191f6c4c-3d47-4722-8a26-fe763cc2c413/spool2.png","rotation":0,"imageHash":"10YGJoqNNHitbWVivlZlB0XIcLoIqEo=","imageWidth":1600,"imageHeight":1397,"__typename":"PrintImageType"},"images":[{"id":"2071833","filePath":"media/prints/272767/images/4359067_191f6c4c-3d47-4722-8a26-fe763cc2c413/spool2.png","rotation":0,"imageHash":"10YGJoqNNHitbWVivlZlB0XIcLoIqEo=","imageWidth":1600,"imageHeight":1397,"__typename":"PrintImageType"},{"id":"2071834","filePath":"media/prints/272767/images/4359068_9e478cd6-b392-4391-9614-0cc091e747f1/spool1.png","rotation":0,"imageHash":"FzcGHIibZZmDdYRQmGED6ieRDA==","imageWidth":1400,"imageHeight":871,"__typename":"PrintImageType"},{"id":"1289687","filePath":"media/prints/272767/images/2640178_4f0516a4-6b32-4366-b312-b48e4b072a13/screen-shot-2022-10-24-at-95138-am.png","rotation":0,"imageHash":"cQgKHoTHl5iPhXiOeyRnmFeHP2HHQMc=","imageWidth":3558,"imageHeight":2978,"__typename":"PrintImageType"},{"id":"1191530","filePath":"media/prints/272767/images/2426404_571f3dc5-3c6c-4d58-88ff-1222dad414da/screen-shot-2022-09-07-at-121710-pm.png","rotation":0,"imageHash":"8wcKDYTpppc3t4hvlYeLmmBhBRVH","imageWidth":3094,"imageHeight":2296,"__typename":"PrintImageType"},{"id":"1349391","filePath":"media/prints/272767/images/2770579_1d802867-7fe2-4fde-bb6f-c8650dedf780/screenshot-2022-11-19-at-50157-pm.png","rotation":0,"imageHash":"LegFBoLPn72Hd3ipWIuGqJWHcIb0mYc=","imageWidth":3342,"imageHeight":2744,"__typename":"PrintImageType"},{"id":"1289640","filePath":"media/prints/272767/images/2640074_291b0031-f2c9-46ad-b069-2e160c2493d6/screen-shot-2022-10-24-at-94103-am.png","rotation":0,"imageHash":"sdcNFob5d3Z3iHh8doeIl3d4+Yecf8g=","imageWidth":2566,"imageHeight":2116,"__typename":"PrintImageType"},{"id":"1238082","filePath":"media/prints/272767/images/2527576_11291ee1-c1c7-467b-8e73-924992b7f38d/screen-shot-2022-09-30-at-83302-pm.png","rotation":0,"imageHash":"9hgKHoK3t4e3WIiPdpZ0ind3SUcg1AQ=","imageWidth":2918,"imageHeight":2400,"__typename":"PrintImageType"},{"id":"1289641","filePath":"media/prints/272767/images/2640075_bd0507a5-9006-42d8-8a6c-6ee6905e0282/screen-shot-2022-10-24-at-94151-am.png","rotation":0,"imageHash":"MQkSNoL4h3iHeHiMdoeHmGeIB3hzgDc=","imageWidth":2502,"imageHeight":2110,"__typename":"PrintImageType"},{"id":"1785276","filePath":"media/prints/272767/images/3733272_17a3c3ef-b11e-4c19-b9ba-6f99eece96d2/screenshot-2023-04-16-at-14125-am.png","rotation":0,"imageHash":"6QgGDoJob8lEh4aSeJmrSahnuqD/CJk=","imageWidth":2888,"imageHeight":2438,"__typename":"PrintImageType"},{"id":"1289642","filePath":"media/prints/272767/images/2640073_faf03012-0a51-4bb1-a549-b68883eb8839/screen-shot-2022-10-24-at-93551-am.png","rotation":0,"imageHash":"dwgGFoL3aKiPd3aMdwZn53eHK2D5dZM=","imageWidth":3380,"imageHeight":2842,"__typename":"PrintImageType"}],"tags":[{"name":"spool","id":"61","__typename":"TagType"},{"name":"filament","id":"303","__typename":"TagType"},{"name":"spoolholder","id":"903","__typename":"TagType"},{"name":"filamentspoolholder","id":"904","__typename":"TagType"},{"name":"masterspool","id":"1072","__typename":"TagType"},{"name":"filamentspool","id":"2035","__typename":"TagType"},{"name":"prusamentspool","id":"25876","__typename":"TagType"},{"name":"bambu","id":"56805","__typename":"TagType"},{"name":"bambulabx1","id":"95939","__typename":"TagType"},{"name":"bambulab","id":"95940","__typename":"TagType"},{"name":"bambulabx1carbonams","id":"95941","__typename":"TagType"},{"name":"bambulabx1carbon","id":"95942","__typename":"TagType"},{"name":"bambulabx1ams","id":"95943","__typename":"TagType"},{"name":"ams","id":"98540","__typename":"TagType"},{"name":"x1c","id":"98541","__typename":"TagType"},{"name":"bambux1","id":"107912","__typename":"TagType"},{"name":"bambuams","id":"107913","__typename":"TagType"},{"name":"x1carbon","id":"109566","__typename":"TagType"},{"name":"x1carbonams","id":"111181","__typename":"TagType"},{"name":"p1p","id":"115465","__typename":"TagType"},{"name":"bambuspool","id":"115483","__typename":"TagType"},{"name":"bambulabp1p","id":"115484","__typename":"TagType"},{"name":"p1s","id":"159177","__typename":"TagType"},{"name":"p1smods","id":"159576","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"2952587","filePreviewPath":"media/prints/272767/stls/5505917_8596bf2e-3a3a-496f-8c7a-86916208351f_ca345883-d5a8-4183-bc83-27c719636e5b/bambu-lab-reusable-spool-remix-four-short-v7_preview.png","__typename":"STLType"},"license":{"id":"9","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"349799","modelId":"251457","modelName":"Bambu Lab Reusable Spool Holder Hex Remix","modelAuthor":{"id":"27669","handle":"JoshuaSmith","verified":false,"publicUsername":"Joshua Smith","__typename":"UserType"},"model":{"id":"251457","name":"Bambu Lab Reusable Spool Holder Hex Remix","slug":"bambu-lab-reusable-spool-holder-hex-remix","datePublished":"2022-08-03T17:00:05.954384+00:00","image":{"id":"1113757","filePath":"media/prints/251457/images/2258999_3013b96b-0fc9-4985-82d9-3df5a80e4aad/pxl_20220731_150652278.jpg","rotation":0,"imageHash":"GggKFYLWWGlvc4R/draIer9W+WqG","imageWidth":4080,"imageHeight":3072,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"1","name":"Creative Commons \u2014 Attribution","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"},{"id":"349800","modelId":"270804","modelName":"Improved Bambu Lab Reusable Spool Holder","modelAuthor":{"id":"265883","handle":"Blizzard","verified":false,"publicUsername":"Blizzard","__typename":"UserType"},"model":{"id":"270804","name":"Improved Bambu Lab Reusable Spool Holder","slug":"improved-bambu-lab-reusable-spool-holder","datePublished":"2024-07-22T15:03:10.100853+00:00","image":{"id":"1184440","filePath":"media/prints/270804/images/2410873_e3d8fbc4-80aa-4619-80f9-e1952528a80a/20220903_220745-1.jpg","rotation":0,"imageHash":"GwgODoLzmIioZ3h9h4aXh2iH3XvPnPY=","imageWidth":2976,"imageHeight":2642,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"1","name":"Creative Commons \u2014 Attribution","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"},{"id":"349801","modelId":"271329","modelName":"Bambu X1 Re-Usable Spool","modelAuthor":{"id":"328097","handle":"Siganberg_328097","verified":false,"publicUsername":"Siganberg","__typename":"UserType"},"model":{"id":"271329","name":"Bambu X1 Re-Usable Spool","slug":"bambu-x1-re-usable-spool","datePublished":"2022-09-05T21:11:22.281529+00:00","image":{"id":"1186305","filePath":"media/prints/271329/images/2415137_670da7f8-ce59-4700-9a18-08fc3eb2a07e/20220904_143339.jpg","rotation":0,"imageHash":"11kHDwgLhZc5eHkpSJiWeZlXdVCXCHYK","imageWidth":2880,"imageHeight":2880,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"9","name":"GNU General Public License v2.0","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":"

Design is a lightweight honeycomb snowflake pattern. I added a remaining filament measures, filament label space, as well as filament retaining holes, among other improvements.

","__typename":"PrintType","user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":"5.00","highlightedModels":{"models":[{"id":"39322","name":"Hero Me Gen7 Platform Release4","slug":"hero-me-gen7-platform-release4","ratingAvg":"4.5337078652","likesCount":2264,"liked":null,"datePublished":"2024-10-01T07:12:26.847160+00:00","dateFeatured":null,"firstPublish":"2020-08-23T22:46:17.659650+00:00","downloadCount":49600,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-10-01T07:12:27.145595+00:00","image":{"id":"2027341","filePath":"media/prints/39322/images/4261714_748d41c8-efa3-4b00-8aaa-e6f15f988b37/hero-me-gen7-release-4-public.png","rotation":0,"imageHash":"7OcJFwaj7YZpiajvRjaVmHiXlwZnaHAG","imageWidth":2000,"imageHeight":2000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"529268","name":"Hero Me Gen7.4 Documentation","slug":"hero-me-gen74-documentation","ratingAvg":"2.5555555556","likesCount":115,"liked":null,"datePublished":"2024-01-06T15:29:02+00:00","dateFeatured":null,"firstPublish":"2023-07-17T01:38:01+00:00","downloadCount":null,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-01-11T08:13:04.744408+00:00","image":{"id":"2604420","filePath":"media/prints/529268/images/5555134_a310fa40-bb20-4fc7-8af4-f910a88bbce0_7ae98bec-2170-44b1-98f2-592eaf602fe1/screenshot-2023-06-06-at-75552-pm.png","rotation":0,"imageHash":"tucJF4T3eId4hniMdmeXiHiIeEj3h3QP","imageWidth":1000,"imageHeight":935,"__typename":"PrintImageType"},"nsfw":false,"club":true,"price":"5.00","user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"272767","name":"Bambu Lab Reusable Spool Holder Remix Four (Updated)","slug":"bambu-lab-reusable-spool-holder-remix-four-updated","ratingAvg":"4.9042553191","likesCount":1186,"liked":null,"datePublished":"2025-03-15T15:59:31.857559+00:00","dateFeatured":null,"firstPublish":"2022-09-07T19:32:59.277740+00:00","downloadCount":6221,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-15T15:59:31.893730+00:00","image":{"id":"2071833","filePath":"media/prints/272767/images/4359067_191f6c4c-3d47-4722-8a26-fe763cc2c413/spool2.png","rotation":0,"imageHash":"10YGJoqNNHitbWVivlZlB0XIcLoIqEo=","imageWidth":1600,"imageHeight":1397,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"303288","name":"Adapter Rings for 250g Filament Spools for Bambu Lab X1-Carbon AMS (140-154mm diameter)","slug":"adapter-rings-for-250g-filament-spools-for-bambu-l","ratingAvg":"4.6800000000","likesCount":393,"liked":null,"datePublished":"2023-07-17T01:53:41.612915+00:00","dateFeatured":null,"firstPublish":"2022-10-26T16:28:23.320358+00:00","downloadCount":2187,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-07-17T01:53:41.630483+00:00","image":{"id":"1294053","filePath":"media/prints/303288/images/2649630_012f4aef-9c89-4899-bcde-a498085caa72/img_1796.jpg","rotation":0,"imageHash":"3uYFLopoRzaFiIaAcrk3F7hzF3lwgQc=","imageWidth":1800,"imageHeight":1561,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"76124","name":"Stackable Crate (large)","slug":"stackable-crate-large","ratingAvg":"4.9411764706","likesCount":345,"liked":null,"datePublished":"2023-05-14T12:53:30.354252+00:00","dateFeatured":null,"firstPublish":"2021-09-18T10:52:53.512231+00:00","downloadCount":1569,"mmu":false,"category":{"id":"45","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"45","name":"Other House Equipment","nameEn":"Other House Equipment","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-05-14T12:53:30.368108+00:00","image":{"id":"430332","filePath":"media/prints/76124/images/823271_c8039b2b-7123-4246-b869-04db82c2425f/large_display_crate2_76124.jpg","rotation":0,"imageHash":"lMoGHYh0eHlYdGWVlWZocEmCsGMI","imageWidth":900,"imageHeight":667,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"292346","name":"Silica - Desiccant Dry Box for Bambu Lab AMS-US Round","slug":"silica-desiccant-dry-box-for-bambu-lab-ams-us-roun","ratingAvg":"4.9024390244","likesCount":976,"liked":null,"datePublished":"2023-07-17T01:54:12+00:00","dateFeatured":null,"firstPublish":"2022-10-10T03:38:46+00:00","downloadCount":6052,"mmu":false,"category":{"id":"136","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"136","name":"Bambu Lab Parts & Upgrades","nameEn":"Bambu Lab Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-09-04T20:20:02.371771+00:00","image":{"id":"1292476","filePath":"media/prints/292346/images/2646388_71c7bfbf-776c-4063-91ba-178a24d5ccd0/img_1792.jpg","rotation":0,"imageHash":"mRgKDYJjaXeBh5h/lpdoh6T7UOoN","imageWidth":1600,"imageHeight":1151,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"106303","name":"Delta-P duct for MK3S(+)","slug":"delta-p-duct-for-mk3s","ratingAvg":"4.7619047619","likesCount":123,"liked":null,"datePublished":"2021-12-27T00:19:32.316253+00:00","dateFeatured":null,"firstPublish":"2021-12-27T00:19:32.316253+00:00","downloadCount":764,"mmu":false,"category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-05-03T11:25:18.859439+00:00","image":{"id":"551701","filePath":"media/prints/106303/images/1060266_5b086e92-5f81-4b3b-bdf7-e35709ecf5a8/delta-p-duct.jpg","rotation":0,"imageHash":"FDkKF4L5eGd9iIaMhZZ5V3d5d/r3KG8M","imageWidth":567,"imageHeight":526,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"76108","name":"Trash Walker (large bin)","slug":"trash-walker-large-bin","ratingAvg":"0E-10","likesCount":23,"liked":null,"datePublished":"2021-09-18T10:38:17.947291+00:00","dateFeatured":null,"firstPublish":"2021-09-18T10:38:17.947291+00:00","downloadCount":90,"mmu":false,"category":{"id":"45","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"45","name":"Other House Equipment","nameEn":"Other House Equipment","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-04-12T14:13:43.471123+00:00","image":{"id":"430163","filePath":"media/prints/76108/images/823041_90bb4876-8bc1-46b8-b72f-b5ac28c2b504/large_display_screen_shot_2020-05-08_at_61700_pm_.png","rotation":0,"imageHash":"WogKFwgDmpeJZ4iWaJdYeId15Sb5BooI","imageWidth":1019,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"56045","handle":"MediaMan3D","verified":false,"dateVerified":null,"publicUsername":"MediaMan3D","avatarFilePath":"media/auth/avatars/fd/fd4bef5b-afea-4d86-b74e-4c9f1360a7e0.jpg","badgesProfileLevel":{"profileLevel":28,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":true,"stripeAccountActive":true,"membership":{"id":"0-56045","currentTier":null,"__typename":"UserMembershipType"}},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}