Wallplate Bracket / Mount for Caseta by Lutron Pico Remote

I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant, and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to add the following features:

• Added extra material around the bottom of the remote insert that stabilizes it in the mount
• Added a small bump towards the bottom of the remote that clicks it into place
• The remote insert is now longer and wider to stabilize the remote better in the mount.
• The mount is now wider to keep it from flexing.

I found in my iterations that this version mounted about as well or better than the original Lutron mounts. Thank you to joshcarter for posting the original!

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Resolution:

.15 - I wanted to make sure that the bump to hold in the remote is printed in a high enough resolution as it is only .5mm high.

Notes:

You may want to print this in a color matching your cover plate.

Category: Household

Added a bump and ledges out to the side for a more secure feeling fit.