Ultimate Filament Sample (with storage box)

I made this filament tag which tells you a lot about your filament.

Features:

The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch.

There is a key ring hole included but it can also be glued to filament box (or with double sided tape) or just stored somewhere.

I tried my best to include as many filament types as I knew, but if there are filaments that I forgot please let me know and I will add them. If you want to, you can change it yourself in the .f3d file.

Edit: (11/16/2022)

I just added a little storage box to stare all of your swatches!
You can change the amount of slots in the .f3d file. There should be a parameter called NumberOfSlots.

Print settings:

This print must be printed at 0.2mm layer height. Otherwise the transparency test will fail.

Edit: (08/25/2023)

I noticed that the .3mf files do not automatically orient the sample right. Make sure you print it with the back side facing down.