Mount the MKS CANable (not pro) to a din rail like those found on Voron printers
3
53
0
444
updated July 21, 2022

Description

PDF

This is ONLY for the MKS produced CANable which does not follow the same spacing as the official non pro version. I've included the Voron din rail clip although any other clip with 31.5mm spacing should work. 

BOM: 

2x M2x10 self tapping screws 

1x MKS CANable 

1x zip tie

 

Print both parts using strong print settings, I used the general Voron parts recommendations. Use the two screws to attach the two parts together, orientation doesn't matter. Slip a zip tie through the space between the two parts and tighten lightly around the module. 

Tags



Model origin

The author hasn't provided the model origin yet.

License