Voron BTT Smart Filament Sensor (SFS) Mount

Remove the 6 screws on the back of the sensor and reuse them to mount the printed part to the sensor housing Then use 2 M3x14 screws and 2 M3 roll-in/hammerhead T-nuts to mount it to the frame after the panels are installed. It's designed for the 6mm panels used on the back of the 2.4. 

I reccomend printing with standard Voron parts settings in a strong material. 

As pictured printed on a Voron 2.4 in Polymaker Polylite ABS.