Imbus holder
What do you need:
1, printed 3D model Imbus holder
2, 2x screws-from spare bag (picture-4)
lenght about 12.8mm (picture-5)
diameter through the thread 2.9mm (picture-6)
model was maded in Autodesk Inventor 2020
Tymyn
print file with orientation like on (picture 7)
For better results increase bridge speed on 5 mm/s (picture 8)
!!!! IN MY 3mf IT WAS CHANGED !!!!
1, Choose Advanced or expert mode)
2, Print settings
3, Speed
4, set speed on 5mm/s
Happy printing
The author hasn't provided the model origin yet.