Watering can with stripes

UPDATED → 20.02. 2022

1.     Removed bottom text due to customer comment

UPDATED → 13.04. 2021

Changes:

1. Updated STL, 3MF and G-codes
2. Thicker bottom
3. Reduced overhang at the handle at the bottom
4. Thicker walls due to waterproofness.
5. Added version text inside can (V2)
6. Removed stripes on pipe.

----------------------------------------------------------------------------------------------------------------

Print from PETG due to waterproof.
PLA does not have to be waterproof and is more prone to layer discontinuity.

Need only 29,5m of filament
supports for better surface under grip overhang 

Printed on maximal layer height for 0.4mm nozzle → 0,32mm.

If you print it, let me know in comments