Customizable Magnetic Token Box for Board Game Organization

This is a parametric box that's designed to help you create custom storage solutions for your board games - especially the more obscure ones. 

Please leave a comment if there are other box types you would like. 

Steps:

1. Download and install fusion 360 personal, make an autodesk account, and login. https://www.autodesk.com/products/fusion-360/personal
2. Download the file attached to this project, and open it in 360.
3. In fusion, navigate to MODIFY > Change Parameters
   
4. In the parameter window, change the expressions to match your desired proportions
   
5. The parameters are:
   1. magnetDia - the diameter of the magnet you will be using. I recommend to use and 5mmx3mm and to leave all the magnet parameters alone.
   2. length - how long (in mm) the box will be on the Y axis
   3. width - how long (in mm) the box will be on the X axis
   4. baseHeight - how tall the box will be on the Z axis
   5. lid height - how tall the lid of the box will be. I usually use shorter lids, but have used long lids in games like Wingspan, where I want all the eggs in one box, but use the lid and base as containers I can spread around the table.
   6. thickness - thickness of the walls. I recommend making this a multiple of you nozzle size. I use a 0.8mm nozzle, so I make my walls 1.6mm to get two layers and a much quicker print.
   7. magnetSpace - the amount of room around the magnet. tweaking this can help with gluing.
   8. magnetHeight - the height of the magnet you'll be using.
6. When you have set your parameters, click ok.
7. On the left side of the screen, you'll see a folder called Bodies. Open that folder and right click Box Base > Save as Mesh.
   
8. Click OK in the popup.
9. Repeat for Box Lid Mag
10. Open the meshes in your slicer, slice, and print.

Please leave a comment if you have questions.