Power supply holder to mount your Prusa Mini+ power supply to the back of your workbench, desk or table to keep it off of the floor and out of the way. The power supply holder is secured with two small countersunk wood screws. Once mounted, the power supply brick is simply dropped into place, making it super easy to pull it out if you need to work on the printer or move it to another spot. The sides are cut out to allow space for the input and output cables. Prints in about 2h35m at 0.30mm layer height or if you really need higher quality, you can run it at 0.20mm and get it in 5h27m.
Use a brim to ensure that the corners stay attached to the print bed. Enjoy and Happy Printing!
The author marked this model as their own original creation.