More coasters to populate your house with! As with my previous designs, each coaster has two variants, one with an inverted pattern. This time the coasters feature Celtic designs that will have you tied up in knots. (Get it? Cause they're Celtic knots, or at least most are, and you tie things with knots, but… I'll see myself out.)
Please post your makes, and happy printing!
Print Settings
- Layer Height – 0.2mm
- Material – PETG, PLA, or other
- Infill — 15% Honeycomb
- Perimeters – 2
- Top Fill Pattern – Octagram Spiral
- Bottom Fill Pattern – Octagram Spiral
- Detect Thin Walls – Optional – Some of the coaster designs may benefit with this setting on, please observe the difference within your slicer preview.
- Ironing – Optional – 20% at 0.09mm spacing. (If you want your coasters to look cleaner and crisper)
Colors & Layers
- Layer Height 0.0-2.6 — Color 1
- Layer Height 2.8-3.0 — Color 2
- Layer Height 3.2-5.0 — Color 3 (if you want the border to be a different color)
Tags
The author marked this model as their own original creation.