Wolf Coasters

Update:  11/30/2023 -  Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked.

Some canine coasters for your drinks to sit on. There are four designs and two versions of each. There is also a coaster holder that can comfortably house seven or eight coasters. I used certain colors in my example, but feel free to use whatever colors you want.

Please post your makes, and happy drinking! (Responsibly, of course) ;)

Print Settings

• Layer Height – 0.2mm
• Material – PETG, PLA, or other
• Infill — 15% Honeycomb
• Perimeters – 2
• Top Fill Pattern – Octagram Spiral
• Bottom Fill Pattern – Octagram Spiral
• Detect Thin Walls – Optional – Some of the coaster designs may benefit with this setting on, please observe the difference within your slicer preview.
• Ironing – Optional – 20% at 0.09mm spacing. (If you want your coasters to look cleaner and crisper)

Colors & Layers

• Layer Height 0.0-2.6 — Blue
• Layer Height 2.8-3.0 — White
• Layer Height 3.2-5.0 — Black (if you want the rim to be a different color)