Les Paul Clone Hero Controller

Stuff you need to buy:
-M3x20mm screws (21 count)
-M3x20mm nuts (21 count) (Optional but suggested)
-Kailh low profile switches (9 count)
-USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller
-USB cable

OPTIONAL: 

There is two “FretsBottom” STLs. 'LesPaul_FretsBottom_PCB' is for a custom Kailh switch mounting PCB that I designed found here:

https://drive.google.com/file/d/1o3VGSX-CaVTtJTDPbkZ8RzP2AtUJbQPJ/view?usp=sharing 

and 'LesPaul_FretsBottom_NOPCB' is for those who don't want to have to order a PCB.