F-1 Engine

3D model of the F-1 Engine from the Saturn V rocket designed for 3D printing. Model can be assembled with standard super glue.

Default Dimensions (L x W x H):
- 1:33 scale: 4.25 x 4.25 x 6.75 in (110 x 110 x 172 mm)

Check out my other rocket engine models at In3DSpace.com 

Print instructions

Assembly Instructions: bit.ly/f-1-assembly (Also in Files tab)
 

Recommended Print Settings:

F-1 Nozzle:
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
- Infill: 15%
- No supports required

F-1 Powerpack:
If the STL is too large for your print bed, it can be split into individual pieces using PrusaSlicer or Meshmixer
- Nozzle Diameter: 0.4mm
- Layer Height: 0.15mm
- Infill: 15%
- Supports only required for oxidizer dome piece (see picture)

F-1 Outrigger:
Can be a difficult piece to print. If having issues, try printing slower.
- Nozzle Diameter: 0.4mm
- Layer Height: 0.15mm
- Infill: 15%
- Perimeters: 3
- Brim required: recommend 8mm so they form a single piece, helps with removal from bed
- No supports required
- Print Speed: 50%