Leider sind 2,2 Zoll TFT Touch screens nur noch schwer zu bekommen.
Bitte vergrößere den Tricorder für die 2,4 Zoll TFT Touch Screens
2.2 inch TFT Touch screens are hard to come by. Please enlarge it a bit to use the 2.4 inch screens. (should be +5mm in diagon).
Printability Remix of Arduino Tricorder
These are the mods I made to print my tricorder.
52
136
0
1397
updated January 10, 2023
Makes
Comments
@AlecColsonSGC_123165 Sure. In the tricorder_body_brim.3mf file, right click the tricorder_cp.stl part and choose Add Negative Volume > Box. Adjust the size as needed for your lcd screen fitment.
Be warned. The internal spacing of this design is very tight. I do not recommend using a larger screen.
@thatdecade Thank you. I try that.
I dont want a larger screen but the 2.2" TFT Touch is not to get here.
looking back and forth between your remix and the original. probably going to swap to yours because for one you actually have a wiring diagram and his grainy images are just too much to try to make out. i just hope i can figure out the bits that branch off from one item to another. i have the sound board you recommend coming in tomorrow. i know you say in the github to refer to the sense docs for the battery and the switch. where can i find that?
@BananaMustang the docs for the different boards are on adafruit. Click the learn link from the product listing.
This should be the link for the main circuit
https://learn.adafruit.com/adafruit-feather-sense