SolidCore CoreXY X-Carriage

SolidCore X-Carriage 

XCarriage Design

The carriage and gantry are designed to be light weight and strong. We currently use c-shaped aluminum stock because it reduces machining time. The reduced machining time and minimized waste helps but it’s a compromise. That’s going to change soon. We’ll probably make some changes such as reorienting the the y-axis linear rail into a vertical position similar to the RailCore but the current horizontal version will be easier to adapt an E3D Toolchanger.

MGN12-H Linear Rail

The x-carriage fits MGN12-H linear rail dimensions

X-Carriage Parts List – BOM Guide

2 x Carriages

2 x MGN12H Rail Clamps

2 x GT2 Toothed Idlers

2 x GT2 Smooth Idlers

4 x M5 x 35mm Long Button Head Cap Screw

8 x M3 x 6mm Long Button Head Cap Screw

12 x M5 Steel Washers 1mm Thick

8 x M5 Nylon Washers

2 x GT2 Idlers

4 x 10.5mm Pulley Spacers