Raspberry Pi camera mount for duplicator i3

This is a camera mount for attaching a raspberry pi camera board onto a duplicator i3 v2.1.

The POV will follow the Z-axis and therefore gives a nice overview of your print from bottom to top.

There's one version (39) which can be attached onto the left side of the x-gantry without obstructing anything, but will decrease the x axis width if attached to the right.

If you prefer right, like I do, print the version #49 which is longer and therefore gives a better view (I've added 2 pictures that are supposed to show the POV). The downside of this version is that it's rather flimsy and prone to vibrations.

For installation you'll need 4, resp. 2 pieces of M3x10 screws. The original ones will be too short.