I designed this from scratch in OnShape. It is about 3.125 inches high, with a diameter of 4 inches. Piece 1 includes the base and support column, and piece 2 is meant to be glued to column. I use E6000 glue, and it has worked great with 4 of these that I have printed.
I had a hard time getting PETG off of the print bed in my original design, but now both bottom and top pieces have a 2mm fillet so I've been able to pry the pieces off with no issue. Of course PLA works great too.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20%
Filament:
SUNLU PLA or PETG Category: OfficeThe author marked this model as their own original creation. Imported from Thingiverse.