RED Komodo Cheese Plate

The Komodo and SmallRig's Cage don't include 3/8"-16 threads which are stronger and also I haven't been able to find a great cheese plate for this small camera. So I made one for my DOP's Komodo :)

It retains easy access to the power switch and record button. Fair amount of space between the plate and the right-side exhaust grill. I've had other side plates on the Komodo before and it's not moved the Komodo's temperature at all.

I've stress tested each thread after priting and they all hold up surprisingly well. No sign of damage from the screws, stripping or breakage. The two right ¼"-20 screws fit into the top & bottom threads of the Dummy side of Small Rig's Cage for the Komodo. 

Find it here: https://www.smallrig.com/smallrig-camera-cage-3046-for-red-komodo.html

NOTE: I am still a beginner so I'm unable to properly tidy up the back of the plate when I adjusted it to fit around the SmallRig rosette on the body cage. The plate fits flush with the cage and works great, but yeah it could be prettier on the rear. Will update once my skills have grown.

FUTURE PLANS: I will add ARRI Locking Pin holes to each thread

SETTINGS:

*Rotate file 180 degrees so it's upside down*

 Infill: 70%

Walls: 4

Nozzle: 0.4

NO SUPPORTS