*****************
***ITALIANO***
*****************
Non è più un problema stampare il TPU con la Super Racer!
Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno dei migliori Hotend per alto flusso: il Magnum Mosquito di Slice Engenieering.
Per quanto riguarda l'estrusore ho cercato di restare su qualcosa di leggero ma dalle ottime prestazioni: lo Sherpa mini.
Chiaramente tutto il gruppo Effector è diventato più pesante rispetto al V6 Bowden, cosa che, per una Delta, non è assolutamente positiva, lo so.
Sarà necessario scendere leggermente con i parametri di stampa, soprattutto quelli di velocità. In compenso la ritrazione è diventata minima, ho eliminato lo zHop e non ho mai più avuto problemi di estrusione (il CLONE BondTech DualDrive stock è veramente pessimo!).
Quello che ho perso in velocità l'ho recuperato nella gestione delle retrazioni.
Io mi sono stabilizzato con i seguenti valori:
M92 X80.00 Y80.00 Z80.00 E706.40
M203 X200.00 Y200.00 Z200.00 E80.00
M201 X3000.00 Y3000.00 Z3000.00 E4000.00
M204 P2000.00 R2000.00 T2500.00
M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z10.00 E10.00
M603 L70.00 U50.00
M412 S1 D100.00
Ricordatevi che ho dovuto modificare la piastra in alluminio dell'effector per poter ospitare il Mosquito.
Ho allegato il file STL della piastra modificata. Qualcuno ha provato anche a stamparla, ma io preferisco mantenere rigido almeno questo componente.
*****************
***ENGLISH***
*****************
It is no longer a problem to print the TPU with the Super Racer!
I designed a new case to transform the Effect from Bowden to DirectDrive and, for the occasion, I thought of installing one of the best HotEnds for high flow: the Magnum Mosquito from Slice Engenieering.
As for the extruder, I tried to stay on something light but with excellent performance: the Sherpa mini.
Clearly the whole Effector group has become heavier than the V6 Bowden, which, for a Delta, is definitely not a good thing, I know. It will be necessary to go down slightly with the printing parameters, especially those of speed. On the other hand, the retraction became minimal, I eliminated the zHop and I never had problems with extrusion again (the CLONE BondTech DualDrive stock is really bad!).
What I lost in speed I recovered in the management of retractions.
I have stabilized with the following values:
M92 X80.00 Y80.00 Z80.00 E706.40
M203 X200.00 Y200.00 Z200.00 E80.00
M201 X3000.00 Y3000.00 Z3000.00 E4000.00
M204 P2000.00 R2000.00 T2500.00
M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z10.00 E10.00
M603 L70.00 U50.00
M412 S1 D100.00
Remember that I had to modify the aluminum plate of the effector in order to accommodate the Mosquito.
I have attached the STL file of the modified plate. Someone has also tried to print it, but I prefer to keep at least this component rigid.
Category: 3D Printer Accessories
The author marked this model as their own original creation. Imported from Thingiverse.