******************
***ITALIANO***
******************
Annoiato del solito V5 di serie sulla Anycubic ho preferito passare al V6, più precisamente al Phaetus Dragonfly BMO AllMetal.
L'adattatore deve anche supportare l'autolivellamento della stampante, mantenendo l'hotend stabile e rigido durante il processo.
Utilizzando dei dadi M3 è possibile stringere correttamente i componenti tra di loro ed il tutto sulla staffa della stampante.
Un collarino aiuta a mantenere il tubo PTFE nella corretta posizione.
Sto stampando da diverse settimane senza problemi e soprattutto sto notando le differenze rispetto al V5 precedente.
Per il montaggio sarà solamente necessario delle viti M3 e dadi M3.
----Aggiornamento: elemento correttamente specchiato, pronto per la stampa.
******************
*ENGLISH*
******************
Bored of the usual standard V5 on the Anycubic I preferred to switch to the V6, more precisely to the Phaetus Dragonfly BMO AllMetal.
The adapter must also support printer self-leveling, keeping the hotend stable and rigid during the process.
Using M3 nuts it is possible to correctly tighten the components together and all on the printer bracket.
A collar helps keep the PTFE tubing in the correct position.
I have been printing for several weeks without problems and above all I am noticing the differences compared to the previous V5.
For assembly you will only need M3 screws and M3 nuts.
---- Update: item properly mirrored, ready for printing.
The author marked this model as their own original creation. Imported from Thingiverse.