Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV sailing boat.
The Vista is screwed to 4 standoffs and flooded with fresh air from all sides, so its automatic temperature control can be turned off to prevent it from going into low-power mode. The fan is mounted for sucking the warm air out.
The housing measures about 43x38x35mm including screw heads and all together weighs about 56 grams.
In addition to the Vista unit you will need:
FreeCad source included.
Printer:
Anycubic I3 Mega S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament:
PETG, ABS, ASA-X…
Notes:
Attach the 5V regulator to the inside of the housing by a piece of double-sided self-adhesive tape.
Category: R/C Vehicles
The author marked this model as their own original creation. Imported from Thingiverse.