Magliner 10" Trough Dividers w/t Flip Lid

I found on-set that our things were getting mixed together in the box and also were on display for any passer-by. These dividers help keep our things separate and hidden.

Plus the flip lid can be opened with the back/side of your hand to help reduce touching similar surfaces with the current COVID concern :)

The hinge is just 1.75mm PLA slid inside. Nice & easy!

NOTES:

• if you rotate the Hinge.stl 45 degrees when slicing, you will be able to print it within the parameters of a Ender 3 V2's bed
• make sure to print the right amount of each item. I actively left them as individuals so that you can cram as much onto one bed
• the Glue-in Slots and the hinge obviously need to be glued down

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

Yes

Supports: 

Yes

Resolution:

200

Infill: 

20

Filament: Comgrow Creality PLA 
 

Notes:

PRINTED ON Ender 3 V2