Pegboard holder for Stepcraft 43mm spindle mount accessories

A holder for devices that fit into the Stepcraft 43mm diameter spindle clamp. Fits 1/4" pegboard holes spaced 1" apart

Initially I thought it would be for my HF-500 spindle but its a bit heavy and the cable is quite thick. Up on a pegboard, which is not the most stable place to start with, it seemed like and accident waiting to happen

Still quite sturdy and it is good for other things that go onto the same clamp like the laser cross alignment pointer, the vinyl cutter or one of the adapters for various tools and devices

Print upside down with a brim, you can use supports to reduce the amount of cleanup a bit

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

20%

Filament: Amz PETG/PLA Grey

Notes:

PETG is a little tougher than PLA and will handle the abuse of fitting and removing the holder from the pegboard a little better

Use a brim unless you have good adhesion else the tips of the hooks may get knocked off

Category: Machine Tools